|
|
|
|
ALLIED SOLUTIONS INDIA P.LTD.
Mumbai |
|
|
|
|
|
|
|
|
|
Nitrogen Generator |
- High pressure booster, multi-stage, air cooled, pressure lubricated, continuous-duty rated
- High durability membrane air separators
- Automatic condensate drain with collector (includes switch for high condensate level)
- UL® labeled Control Center with PLC controller. Master central system includes interactive touchscreen interface for operation, maintenance and troubleshooting
- On-line percent oxygen monitor
- Pressure sensors for oil and final product pressure
- Emergency stop push button
- Visible alarm annunciation
- Sound attenuated enclosures for compressors and membrane module
|
|
|
|
|
Nitrogen Compressor |
- Three, Four or Five Stage BAUER High Pressure Gas Compressor
- Inlet Pressure Regulation System
- Air Cooled Intercoolers and Aftercooler
- Oil Removal Filtration System < 1.0 PPM (W)
- Automatic Drains on Interstage and Final Oil Moisture Separator and Condensate Collection Tank
- Sound Attenuating Enclosure (under 75 dBA)
|
|
|
|
|
Control System With Integral N2 Generator |
- Three Stage, Air cooled, Reciprocating Compressor
- High Durability membrane air separators
- Automatic condensate collector with high condensate level switch
- Multiple pressure sensors including: Supply pressure, Compressor inlet pressure, and process pressure
- Light tower for alarm annunciation
- Ambient temperature range 40° to 113° F
|
|
|
|
|
Nitrogen Control Module |
Programmable Logic Controller (PLC) that monitors:
- Active gas injection profiles
- Current inlet pressure
-
- Current channel output pressure
- Current molding machine safety status
- Automatic purge settings
- Control interface input status
- Automatic purge settings
- 25-pin port for remote hand-held touch screen control interface
- 9-pin serial port for remote PLC access
|
|
|
|
|
Nitrogen Control Unit |
- 10.4” passive matrix color touch screen
- Programmable Logic Controller (PLC) that monitors:
- Active and saved gas injection profiles
- Current inlet pressure
- Current channel output pressure
- Current molding machine safety status
- Automatic purge settings
- Control interface input status
- System response setting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|